ElectronicsHow It Works
IPX4, IPX5 and IPX7: Water Resistance Ratings Explained
IPX4 means splash protection, IPX5 covers water jets and IPX7 covers temporary immersion. The X means the solids-protection category is unspecified.
IPX4 meaning: what does the rating protect against?
The IPX4 meaning on a product label is simple. The enclosure passed a test for splashing water. The X means the solids-protection category is unspecified by that marking. IPX5 concerns water jets, while IPX7 concerns temporary immersion. These are different exposures, so the right rating depends on how the product will actually be used.
IP does not mean a device is waterproof in every circumstance. Test conditions, the product’s construction and the maker’s use restrictions remain part of the answer.
What does the X in an IP rating mean?
The first characteristic position normally describes protection against solid objects and access to hazardous parts. The second describes water protection. In IPX4, the X replaces the first numeral, leaving the water category specified as 4.
X does not mean the product definitely has no dust resistance or that it failed a dust test. It means the marking does not specify that category. A zero is different: it declares no protection for the relevant category.
Likewise, IP6X specifies the dust category while leaving the water category unspecified. Do not fill in a missing characteristic from appearance, price or the product’s intended market.
The IP67 vs IP68 comparison shows a complete two-numeral example: the first digit is the same, while the water designation changes.
Every IPX water level from 0 through 9K
Intertek and Oriental Motor describe the ordinary water levels. IABG’s comparison table identifies which standard covers each test from IPX1 through IPX9K, including the tilt angle for IPX2. ETAC gives the IPX7 depth and duration, and Applus+ Keystone explains how IPX8 conditions are set. The K variants are identified separately because ISO 20653 covers special road-vehicle requirements. They are included in the same reference table to prevent the common mistake of treating 9K as simply IEC’s next numeral.
| Marking | Water exposure described | Important limit or distinction |
|---|---|---|
| IPX0 | No water protection | Not a splash-resistance claim |
| IPX1 | Vertically falling water drops | A controlled dripping test |
| IPX2 | Falling drops with the enclosure tilted up to 15 degrees | Different orientations are tested |
| IPX3 | Spraying water | A defined spray exposure, not immersion |
| IPX4 | Splashing water from different directions | Does not establish submersion suitability |
| IPX4K | Higher-pressure splash exposure in the ISO 20653 vehicle context | A K variant, not the ordinary IEC IPX4 test |
| IPX5 | Water jets | Defined nozzle and exposure conditions |
| IPX6 | Powerful water jets | Different from a pressure-cleaner or immersion claim |
| IPX6K | Higher-pressure jet exposure in the ISO 20653 vehicle context | Check the vehicle-standard test and product declaration |
| IPX7 | Effects of temporary immersion | For small enclosures, the familiar test is 1 meter for 30 minutes |
| IPX8 | Effects of continuous immersion under specified conditions | Read the product’s depth, duration and other conditions |
| IPX9 | High-pressure, high-temperature water-jet exposure under IEC 60529 | Not an unrestricted immersion rating |
| IPX9K | High-pressure, high-temperature wash exposure under ISO 20653 | Read the K-standard context; do not silently rename it IPX9 |
This table explains the categories rather than reproducing a full test procedure. Flow, pressure, duration, positioning and acceptance criteria belong to the applicable standard and test report. A household experiment is not equivalent certification.
Is IPX5 better than IPX4?
It addresses a more demanding jet exposure within the relevant progression, making it more appropriate when that exposure matches the intended job. It still does not turn a splash- or jet-rated device into an immersion-rated one.
Think about the water source. Rain, splashing, a directed jet and submersion place different demands on an enclosure. A higher-looking number is only useful when its tested exposure answers the actual requirement.
For a product used during exercise, check the maker’s sweat and cleaning instructions as well. A water category alone does not establish resistance to every contaminant, cleaning chemical or long-term use pattern.
What exactly does IPX7 immersion mean?
For the small consumer devices discussed here, the familiar IPX7 test is temporary immersion at 1 meter for 30 minutes. The full standard contains enclosure-positioning details for different sizes, so that shorthand should not be used as a universal laboratory instruction.
The rating concerns the effects of water ingress under those conditions. It does not promise that every part of every enclosure remains absolutely dry, or that the product can perform every function while submerged.
Swimming introduces movement, repeated exposure and potentially different water chemistry. Follow the product’s intended-use instructions rather than converting a static test into a general swimming recommendation.
Why does IPX8 need more information?
The numeral does not supply one universal depth and time. The specified conditions must be read for the product, and the immersion requirements are more severe than IPX7. Without the accompanying statement, a consumer cannot infer the complete exposure limit.
This is why two IP68 phones can publish different depths. Their first numeral identifies dust-tight protection, while their shared 8 does not erase the differences in their declared immersion conditions.
Our broader guide to IP68 and other ratings explains how enclosure claims fit together without treating them as guarantees against every accident.
Does IPX8 automatically include every lower water test?
Do not assume jet protection from an immersion marking alone. Immersion and directed jets are separate exposure categories, and equipment needing both may have a combined declaration. ISO 20653 also explicitly distinguishes its immersion and high-pressure categories from the lower jet progression.
An enclosure that resists still water can respond differently to a directed jet at a seal. Conversely, a jet-rated device is not automatically suitable for being left underwater. The tests answer different questions.
Check the complete marking and referenced standard when the environment includes several exposures. Simplifying a combined code to one impressive-looking number can lose useful information.
Is IPX9K the best rating for every device?
No. It addresses a particular high-pressure wash environment in the road-vehicle standard. That can be valuable for appropriate electrical equipment, but it does not make the code a universal purchasing target for earbuds, phones or swimming products.
IEC 60529 uses IPX9, while ISO 20653 includes K designations. Their test details and contexts should remain identified. A seller using 9 and 9K interchangeably should provide the actual referenced test information.
The useful rating is the one that matches the intended exposure and comes with a clear product specification. More industrial-sounding wording is not a substitute for the correct evidence.
Keep the original specification available when comparing similarly named products; an abbreviated seller listing can omit the conditions that make the rating meaningful.
How should you use an IP-rated product around water?
Follow the maker’s restrictions on liquid type, temperature, charging and cleaning. Water resistance can diminish with wear or damage. An ordinary protective phone case does not automatically restore or upgrade the device’s rating.
If a phone shows a liquid-detection warning, follow its support guidance before reconnecting power. The slow charging guide explains why a water-resistance code does not authorize wet charging.
Read the marking as a defined test claim. Add the manufacturer’s limits and the product’s current condition before deciding whether it suits the job.
Frequently asked questions
What is the IPX4 meaning for earbuds?
It identifies protection against splashing water under the relevant enclosure test. It does not establish immersion suitability, dust protection or resistance to every liquid.
Does X mean an IP-rated product failed the dust test?
No. It means that characteristic is not specified by the marking, which is different from a declared zero protection level.
Can IPX7 products go underwater?
They have temporary-immersion protection under defined test conditions. Follow the product's actual instructions instead of treating the test as unrestricted swimming approval.
Does IPX8 include IPX6 water-jet protection?
Do not assume it from the immersion code alone. Jet and immersion requirements need appropriate evidence or a combined declaration.
Is IPX9K part of IEC 60529?
The K designation belongs to the road-vehicle context of ISO 20653, while IEC 60529 uses IPX9. Read the referenced standard instead of treating the two suffixes as interchangeable.
Sources
- IPX8 Ingress Protection Testing - Applus+ Keystone
- Ingress Protection Ratings by Standard - IABG Environmental Simulation
- IP Testing: Ingress Protection per IEC 60529 - Intertek
- IEC 60529 - IEC Webstore
- ISO 20653:2023 - Road vehicles degrees of protection
- Certification mark for electrical enclosures - TÜV SÜD
- IPX7 Immersion Test - ETAC
- IP Ratings - Oriental Motor
- About splash, water and dust resistance of iPhone 7 and later - Apple