Infrastructure & TransportationGiant Machines & Megastructures

The Largest Cranes in the World

Mammoet's SK6000 has a 6,000-tonne maximum land-based rating. Offshore, Sleipnir's two cranes provide a combined 20,000-tonne tandem capability.

What is the largest crane in the world?

The largest crane in the world needs a category: Mammoet’s SK6000 has a 6,000-tonne maximum land-based capacity, while Heerema’s Sleipnir carries two 10,000-tonne cranes, offering 20,000 tonnes in tandem. A combined shipboard lift is not the capacity of one land crane.

This comparison was checked in November 2026. The land table ranks selected built cranes by published maximum lifting capacity in metric tonnes. The offshore example is kept separate, and the capacities retain their dependence on radius and configuration.

Largest land cranes by published maximum capacity

Rank among listed cranes Crane Maximum published load (tonnes) Year milestone Status
1 Mammoet SK6000 6,000 2026: operator specification checked Built ring crane
2 Sarens SGC-250 5,000 2018: launched Built ring crane
3 SANY 4,500-tonne crawler, labelled SCC9800TM in cited release 4,500 2021: delivered Built crawler crane
4 XCMG XGC88000 3,600 in detailed specification 2025: cited project report Built crawler crane
5 Liebherr LR 13000 3,000 at 12 m radius 2026: maker specification checked Built conventional crawler crane

As of

These are maximum ratings for the named machines, not equal-radius lifting tests. XCMG’s cited announcement calls its crane “4,000-ton” in the headline but gives 3,600 tonnes in the detailed text. The published descriptions span 3,600–4,000 tonnes; this table uses the detailed technical value and does not silently choose the larger headline.

1. Mammoet SK6000: lifting very large prefabricated sections

Mammoet publishes 6,000 tonnes maximum capacity for the SK6000. The operator also describes lifting 3,000 tonnes to a height of 220 metres, a separate capability point rather than a promise to lift the maximum load at maximum height.

The crane supports construction from larger prefabricated modules. Equipment can be built and fitted out away from its final position, then lifted into place as a substantial assembly instead of being constructed entirely piece by piece at height.

Its published ballast figure is 4,200 tonnes. That ballast is part of the crane’s working arrangement, not cargo hanging from the hook. The distinction between supported crane mass and suspended load is fundamental to understanding its scale.

2. Sarens SGC-250: 5,000 tonnes on a ring-crane system

Sarens records the SGC-250’s launch in November 2018 and gives a maximum capacity of 5,000 tonnes. The company’s description emphasizes a containerized approach to transporting parts and preparing ballast.

A ring crane distributes its support around a large ground-level arrangement. Its size and setup needs differ from those of a mobile road crane, even if both machines can be described with a headline tonne rating.

The practical purpose is positioning exceptionally heavy project components. A ring crane’s usefulness depends on being located where its available lifting envelope reaches the required pickup and installation positions, rather than on driving rapidly between many small jobs.

3. SANY’s 4,500-tonne crawler crane

SANY’s October 2021 delivery announcement gives 4,500 tonnes maximum lifting weight and a lifting moment above 98,000 tonne-metres. Its English release spells the model SCC9800TM; that source wording is retained here rather than inventing a corrected model designation.

The crane’s modular arrangement allows large parts to be separated for transport and reconfigured. SANY describes its relationship with smaller crane configurations, showing why the assembled machine is not equivalent to a single indivisible vehicle.

The maximum load and load moment should not be treated as interchangeable claims. One measures the suspended mass, while the other combines load with its horizontal distance from the crane’s reference point.

4. XCMG XGC88000: check the technical number beneath the headline

XCMG’s 2025 project report gives a detailed maximum lifting capacity of 3,600 tonnes, a 216-metre boom and an 88,000-tonne-metre lifting moment.

The report describes installation work for a very large offshore wind turbine from a prepared coastal site. It illustrates why foundation preparation and placement accuracy remain major tasks even when a crane has ample headline capacity.

The article’s “4,000-ton” headline should not be read as a second, independently verified metric rating at the same working position. The more specific technical figure is used for ordering the table, with the discrepancy visible for the reader.

5. Liebherr LR 13000: a capacity attached to a radius

Liebherr publishes 3,000 tonnes maximum load at a 12-metre radius for the LR 13000. The maker separately gives 236 metres maximum hoist height and 200 metres maximum radius.

These are not simultaneous operating promises. In particular, the data do not say that a 3,000-tonne load can be held 200 metres from the crane at 236 metres height. Those conditions require the relevant load chart and boom configuration.

The LR 13000 is a conventional crawler-crane example within a broader heavy-lift field. Larger figures from a ring crane do not invalidate the maker’s more specific claim about its own crane type.

Offshore cranes: what Sleipnir’s 20,000 tonnes really means

Heerema lists Sleipnir as a 2019-built semi-submersible crane vessel with two cranes rated at 10,000 tonnes each. Its 20,000-tonne capability is a tandem operation involving the pair.

Crane builder Huisman publishes a 48-metre radius for each crane’s 10,000-tonne capability in offshore conditions. This is much more informative than a load rating without any indication of reach.

Heerema’s sea-trial account also describes proof loads of 11,000 tonnes per crane. That is a test load, not a new routine rated capacity of 11,000 tonnes. The operational rating and the test condition must stay separate.

The vessel can install or remove large offshore structures. Its floating support system, positioning and lift arrangements make it a different engineering category from a crane standing on prepared ground.

For the supporting vessel’s physical size, compare the world’s largest ships.

Why does lifting capacity fall with distance?

Picture holding a weight close to your body and then extending it outward. The outward position creates a greater turning effect. A crane also has to manage that effect as the horizontal distance of the load increases.

In a simplified calculated example, 100 tonnes at 10 metres produces a load moment of 1,000 tonne-metres. The same load at 20 metres produces 2,000 tonne-metres. These values illustrate multiplication of load and radius; they are not a real crane’s operating limits.

Actual load charts also account for the machine’s structure, configuration and operating conditions. A simple moment calculation therefore explains the basic trend but does not replace a manufacturer’s approved capacity chart.

Why counterweights and ground preparation matter

Ballast helps the crane resist the load’s turning effect, but it adds substantial weight to the ground-support system. The site must accommodate the crane, its counterweights and the load while keeping the support arrangement within its intended conditions.

That is why a heavy-lift project can require extensive preparation before the main crane is assembled. The visible hoist may be brief compared with the work needed to provide a suitable foundation, transport components and arrange the lifting geometry.

The largest land vehicles face related ground-support problems, but carrying a load and suspending it at a distance are different tasks.

Is the biggest crane always the best crane for a job?

Even the route into the site can shape the choice. Components must reach an assembly area before the crane can make a lift. A capacity ranking says nothing about whether those components can pass through the available access route or whether the assembled machine has room to work. Those practical constraints belong alongside the lifting requirement.

The required lift has a mass, a pickup location and a final position. A useful crane must match all of them, including the height and radius along the lift path. Maximum capacity alone cannot establish that match.

A project also needs room for assembly, ballast and support equipment. Larger equipment can enable larger prefabricated sections, but only where transport and site arrangements make that construction method practical.

The biggest trucks help explain the separate transport problem. A crane’s record tonne rating becomes meaningful when its working envelope and the surrounding operation are described alongside it.

Frequently asked questions

Can a 6000-tonne crane lift 6000 tonnes at any distance?

No: the maximum applies to a specified configuration and working position. A load chart defines the permitted load at the actual radius, boom arrangement and other operating conditions.

Is Sleipnir one 20000-tonne crane?

No: the vessel has two cranes rated at 10,000 tonnes each. The 20,000-tonne figure describes their combined tandem lifting capability.

What does tonne-metre mean on a crane?

It is a load-moment unit combining load and horizontal distance. It is not a payload figure that can be read as the same number of tonnes hanging from the hook.

Can giant crawler cranes drive along normal roads?

Their assembled working configuration is intended for a prepared site, not ordinary road traffic. Components are transported separately and assembled where the crane is needed.

Does the tallest crane lift the heaviest load?

Not necessarily: maximum hook height, maximum radius and maximum load often occur in different configurations. A headline specification does not mean all three maxima are available simultaneously.

Sources

  1. Mammoet: launch and specifications of SK6000
  2. Sarens: annual report, SGC-250 launch and 5,000-tonne capacity
  3. SANY: 4,500-tonne crawler delivery announcement
  4. XCMG: XGC88000 project and detailed lifting specification
  5. Liebherr: LR 13000 capacity, radius and hoist height
  6. Heerema: Sleipnir fleet specification
  7. Huisman: Sleipnir's two 10,000-tonne cranes
  8. Heerema: Sleipnir sea trials and crane load tests

More in Infrastructure & Transportation