MaterialsMaterials & 3D Printing
Filament Temperature Chart: Nozzle and Bed Temps for Every Material
PLA print temperature commonly starts within 185–235°C. Use this chart for brand-labeled nozzle and bed ranges, enclosure needs and drying guidance.
What PLA print temperature should you use?
PLA print temperature commonly falls within the 185–235°C nozzle range shown in Prusa’s material guide, with a bed range of 50–60°C. Start with your exact spool’s profile, because temperatures vary by brand and grade. The filament temperature chart below separates general categories from named-product examples rather than pretending every formulation shares one setting.
A range is a starting reference, not an instruction to choose its hottest point. Nozzle design, speed and the manufacturer’s intended profile affect the useful setting. Never exceed the documented operating limits of the printer to reach a number in a chart.
Filament temperature chart: nozzle, bed, enclosure and drying
All temperatures are in Celsius. Rows naming a product apply to that product. Rows labeled Prusa guide reproduce its category ranges. An enclosure entry concerns print stability; emissions still need appropriate controls under the maker’s guidance.
| Material and reference | Nozzle range | Bed range | Enclosure for printing | Drying and storage needs |
|---|---|---|---|---|
| PLA, Prusa guide | 185–235°C | 50–60°C | Usually unnecessary | Keep dry; dry if needed under grade instructions |
| PLA+, eSUN PLA+ | 210–230°C | 45–60°C | Usually unnecessary | Follow the exact modified grade’s preparation instructions |
| PETG, Prusament | 240–260°C | 70–90°C | Not required | Protect from moisture; use its drying guidance when needed |
| ABS, PolyLite ABS | 245–265°C | 90–100°C | Recommended | Dry if moisture has been absorbed |
| ASA, Prusa guide | 220–275°C | 90–110°C | Recommended | Store dry; follow the particular grade’s drying process |
| TPU, PolyFlex TPU95 | 210–230°C | 25–60°C | Normally unnecessary | Moisture control is especially useful; follow its drying instructions |
| Nylon, Prusa guide | 240–285°C | 70–115°C | Recommended | Active drying and dry feeding are commonly important |
| Nylon copolymer, PolyMide CoPA | 250–270°C | 25–50°C | Open printing is possible. Polymaker also recommends an enclosure to reduce warping. | Follow CoPA preparation and dry-feed instructions |
| PC, Prusament PC Blend | 265–285°C | 100–120°C | Recommended, particularly for large objects | Maker describes reduced moisture sensitivity; follow grade guidance |
| PC-CF, Prusament PC Blend Carbon Fiber | 275–295°C | 100–120°C | Maker says not needed | Follow this formulation’s guidance; do not generalize to nylon-CF |
| PVA support, PolyDissolve S1 | 215–225°C | 25–60°C (check model compatibility) | Depends on the compatible shared process | Highly moisture-sensitive; protected feeding and storage matter |
| PVB, Prusament | 205–225°C | 65–85°C | Follow the printer profile | Absorbs moisture. Reseal with desiccant after use. |
| HIPS, Prusa guide | 225–255°C | 100–110°C | Shared job may require one, especially with ABS | Follow grade instructions; keep stored filament protected |
| PP, Prusa guide | 220–245°C | 70–100°C | Grade and geometry dependent | Follow the exact grade; surface compatibility is a major concern |
Compare filaments side by side
| Property | PLA | PETG | ABS | ASA | TPU | Nylon | Polycarbonate |
|---|---|---|---|---|---|---|---|
| StrengthRelative toughness and tensile strength | 3/5 | 3/5 | 3/5 | 3/5 | 2/5 | 4/5 | 5/5 |
| Heat resistanceRelative; typical heat deflection temperature in brackets | 1/5 (~55 °C) | 2/5 (~70 °C) | 3/5 (~95 °C) | 3/5 (~95 °C) | 2/5 | 3/5 (~80 °C) | 5/5 (~120 °C) |
| Flexibility1 = rigid, 5 = rubber-like | 1/5 | 2/5 | 2/5 | 2/5 | 5/5 | 3/5 | 2/5 |
| Nozzle temperatureTypical range | 185–235 °C | 240–260 °C | 245–265 °C | 220–275 °C | 210–230 °C | 240–285 °C | 265–285 °C |
| Bed temperatureTypical range | 50–60 °C | 70–90 °C | 90–100 °C | 90–110 °C | 25–60 °C | 70–115 °C | 100–120 °C |
| Difficulty1 = beginner friendly, 5 = expert | 1/5 | 2/5 | 3/5 | 3/5 | 4/5 | 4/5 | 5/5 |
| In short | Easiest to print and stiff, but softens in a hot car. | Tougher and more heat resistant than PLA; can string. | Heat resistant and tough; warps without an enclosure and gives off fumes. | Like ABS but UV resistant, so it suits outdoor parts. | Rubber-like and flexible; print slowly, ideally with a direct-drive extruder. | Strong, tough and wear resistant; absorbs moisture and must be kept dry. | Very strong and heat resistant; needs high temperatures and an enclosure. |
Typical ranges published by filament makers. Brands differ, so check the label on your spool.
The chart covers common filament families and selected engineering grades, not every commercial formulation. Filled, high-flow, flame-retardant and specialty variants can need different settings from their parent material.
Why do manufacturer temperature ranges disagree?
The polymer name is only part of a filament specification. Suppliers choose different molecular grades, additives and flow behavior. A profile is also developed around particular machines and a particular printing process.
For example, Prusa’s general ABS range is 230–255°C, whereas PolyLite ABS specifies 245–265°C. These are overlapping recommendations with different scopes, not proof that one supplier is wrong. Keep the reference attached to the number.
The nylon rows show an even more useful distinction. PolyMide CoPA’s bed recommendation is much lower than Prusa’s general nylon category. Replacing that product-specific recommendation with the generic category would ignore the formulation’s intended process.
If an exact manufacturer profile exists for your printer and grade, use it before a broad chart. When sources disagree about the same product revision, check the newest technical document and ask the maker if the difference affects your setup.
What is the difference between nozzle and bed temperature?
The nozzle heats filament so it can flow through the opening and bond to deposited material. The bed helps the first layers adhere and supports the thermal conditions around the base of the object. Their jobs differ, so their numbers differ too.
A hotter bed cannot fully correct inadequate nozzle flow. A hotter nozzle cannot necessarily prevent a broad ABS base from lifting in a cold draft. Diagnose the problem at the part of the process where it occurs.
Also distinguish chamber temperature from both. An enclosure changes the environment around the object. It does not grant permission to expose the printer’s electronics or other components to temperatures beyond their specifications.
Is printing temperature the same as heat resistance?
No. Processing needs the plastic to become soft enough to extrude, while service requires the finished object to keep the right shape and properties. A material printed at a high nozzle temperature is not usable at that temperature afterward.
Heat deflection, Vicat softening and glass transition provide different kinds of material information. Load, test method and conditioning affect their meaning. A continuous working-temperature claim needs more context than a nozzle chart provides.
The PLA vs ABS comparison and polycarbonate guide explain why heat performance should be considered separately from printing settings.
How should you tune temperature without guessing?
Begin with the manufacturer’s range and a known-good profile. Confirm the selected nozzle and material in the slicer, then check that the printer is operating normally. Tuning cannot compensate for a blocked nozzle, a slipping drive or an unsupported filament path.
Use a modest print that exposes the symptom you want to improve. A temperature test can help compare stringing, surface quality or bonding within the allowed window. Keep other relevant settings unchanged so the result remains interpretable.
Do not judge strength only by a shiny surface. A visually clean part can have weak layer interfaces, and a rough patch may have a cause unrelated to temperature. Assess the intended function as well as appearance.
Record the exact grade, printer, nozzle and profile version when you find a useful result. A temperature without those details is difficult to reproduce and easy to misapply to a different spool.
When is moisture the real problem?
Popping, foaming, rough extrusion and unusual stringing can point toward absorbed moisture. They are clues rather than a complete diagnosis. Check feeding and the profile before assuming every unwanted thread means the nozzle is too hot.
Nylon, flexible materials and soluble supports particularly benefit from appropriate moisture management. Dry according to the maker’s instructions, then keep the prepared spool protected during storage and, where recommended, during printing.
Use the filament drying guide for that separate process. Drying temperature is not nozzle temperature, and a storage box with desiccant is not automatically an active dryer.
What can a temperature chart leave out?
If corners lift, inspect the surface preparation and thermal environment rather than changing the nozzle automatically. If a fine feature disappears from the sliced preview, more heat cannot restore geometry the slicer never planned to print. If the extruder slips, check whether the requested flow is supported before increasing temperature. Each observation points to a different part of the process.
Profiles can also distinguish the first layer from the remainder of a print. Those differences are deliberate when specified by the maker. Replacing every layer with a single chart value can discard useful behavior, especially around adhesion and the transition to normal cooling. Preserve the matched profile before making a controlled adjustment.
PolyDissolve S1 illustrates why support material needs a separate row. Polymaker gives a bed range for the support itself. In a two-material print the model also touches that bed, so choose a profile that works for both. A support that adheres well is of little use if the model lifts away.
What else should you check before changing settings?
Confirm the build surface, cooling instructions and nozzle requirements. Carbon-filled grades may need wear-resistant hardware. PETG and some PC grades may need a release layer on particular sheets, even when adhesion initially looks excellent.
For a two-material job, start with a model and support combination the maker documents. If the model needs a hotter bed than the support allows, changing the nozzle temperature will not resolve the mismatch.
The filament types guide helps with material selection before tuning begins. A dependable profile for a suitable polymer is more useful than a perfect temperature setting for a material the project does not actually need.
Frequently asked questions
What is the best PLA print temperature?
Use the exact spool's recommended range and matched printer profile. The broad PLA category spans different formulations, so a single best setting would be misleading.
Should the bed temperature match the nozzle?
No. The nozzle needs to make the material flow, while the bed supports adhesion and the build process.
Can I use one temperature for every filament brand?
Not reliably. Even products with the same polymer name can have different processing windows and speed requirements.
Does a hotter nozzle make a stronger print?
Insufficient heat can hurt bonding, but increasing temperature indefinitely can create other problems. Stay inside the material and printer limits and assess the specific symptom.
Does carbon fiber filament use a special temperature?
Its processing range depends on the base polymer and formulation. Carbon-filled PLA, nylon and PC should not share one generic carbon-fiber profile.