ScienceHow It Works

How Does Wireless Charging Work?

Wireless charging transfers energy between coils through a changing magnetic field. Alignment, compatibility and heat affect charging performance.

How does wireless charging work?

How does wireless charging work? Alternating current in a charger’s coil creates a changing magnetic field, which induces a voltage in a nearby receiver coil. Electronics in the device convert and regulate that energy to charge the battery. The charging pad still needs a power source; the wireless part is the short link to the device.

This is magnetic induction. Qi, Qi2 and Apple’s MagSafe apply compatible charging arrangements around that underlying principle, with differences in alignment, certification and supported power.

What happens between the charging pad and battery?

The transmitter contains a coil and driving electronics. Rather than applying a steady current and expecting a permanent magnetic field to keep charging the phone, the circuit produces a changing field.

A receiver coil in the device couples to that field. The induced electrical output then passes through receiver and charging circuitry. The battery ultimately stores energy chemically; it does not store a magnetic field from the pad.

Control communication is also necessary. The Wireless Power Consortium explains that a practical system must let the receiver influence power transfer, including stopping it when appropriate. A working charger is therefore more than two coils placed close together.

Why does alignment affect charging?

The coils must couple effectively. WPC’s technical explanation identifies distance, relative coil dimensions, shape and angle as factors in that coupling. Moving a phone away from the intended position can reduce the effectiveness of the transfer.

Magnetic alignment helps keep the transmitter and receiver in the designed relationship. This can reduce losses associated with poor positioning and make it easier to reproduce a useful charging setup.

The magnets are positioning aids, not a free energy source. They also do not prove electrical compatibility: an accessory can attach magnetically without implementing the charging standard or power level a particular device requires.

Qi, Qi2 and MagSafe compared

Name What it identifies Alignment and power distinction
Qi WPC wireless-charging specifications and certification ecosystem Implementations differ; the name alone does not establish one universal charging speed
Qi2 Magnetic charging ecosystem based on WPC’s Magnetic Power Profile Original Qi2 introduced 15W magnetic charging with controlled alignment
Qi2 25W Newer certified Qi2 power capability WPC launched the Qi v2.2.1 branded update in July 2025
MagSafe Apple’s branded magnetic charging/accessory system Supported peak power depends on the charger, receiver model and power supply

WPC’s specification history also warns against assuming complete backward compatibility for every combination across generations. Identify the actual product’s supported profiles rather than treating every Qi-related name as a universal compatibility promise.

What changed with Qi2 25W?

WPC announced Qi2 25W on 23 July 2025, identifying it with Qi v2.2.1. It raises the branded charging capability from the original Qi2’s 15W to 25W for suitable certified equipment.

That is a power capability, not an efficiency percentage. Nor does it mean every phone on an older Qi2 pad suddenly charges at the higher level. Transmitter and receiver support must match, and the power supply must be adequate.

The consortium’s later specification history contains further revisions. This article names the established 25W branding without presenting its launch revision as the final possible version of the standard.

How does MagSafe fit into the picture?

Apple describes the MagSafe Charger as providing magnetic alignment and adaptive charging power. Its support guidance includes up to 25W peak delivery for compatible combinations, while distinguishing supported devices and power-adapter requirements.

The phrase up to matters. Battery state, temperature and the equipment combination can change the actual rate. A charger advertising a peak is not promising to maintain it throughout a complete charge.

MagSafe is also used in accessory descriptions, so an alignment claim should not be confused with charging certification. Read what an accessory actually supports rather than assuming a magnetic ring establishes all the required electronics.

How efficient is wireless charging?

There is no defensible single efficiency percentage for every charger and device. The measurement boundary matters: power entering the wall adapter, entering the pad, leaving the receiver and reaching the battery are different points.

The general calculation is efficiency = useful output power ÷ input power × 100. In an explicitly hypothetical example, 10W entering a defined charging system and 7W reaching its battery would give 70 percent efficiency for that boundary.

The remaining 3W would represent losses and consumption elsewhere within the defined system. These are illustrative numbers, not test results for Qi, Qi2 or MagSafe. A real comparison needs the same boundaries, equipment and operating conditions.

WPC specifically links coupling and coil quality to transfer efficiency. Its magnetic-alignment explanation supports why positioning can improve performance, without establishing a universal wall-to-battery percentage.

Why does wireless charging produce heat?

Electrical resistance and power conversion create losses, some of which appear as heat in the charging system. The phone may also be consuming energy in its processor, display and radios while the battery charges.

Apple notes that the phone or MagSafe Charger can become slightly warmer during charging. Its guidance says software may limit charging above 80 percent when the battery becomes too warm, then resume when conditions improve.

Thermal management can therefore reduce charging speed even when the charger and phone support a high peak. Why phones get hot explains the wider operating context; warmth alone does not measure efficiency or identify which component is responsible.

Can cases and nearby objects interfere?

A case changes the separation and positioning between coils. Apple recommends investigating thick, metal or battery cases when wireless charging is slow or fails. A compatible case is part of the equipment combination, not a cosmetic detail to ignore.

Objects between the pad and phone can also interfere. WPC’s specification history describes foreign-object detection and power-loss accounting, while Apple’s guidance says to keep intervening objects out of the charging arrangement.

Certification and detection features do not justify using arbitrary accessories between the coils. The intended physical arrangement remains relevant to reliable power transfer.

Why is charging slower than the advertised number suggests?

The advertised rating may describe peak transfer rather than the average across a full charging session. The battery’s acceptance rate can change as it fills, and temperature management can reduce or interrupt charging.

Using the device also consumes energy that might otherwise increase its stored charge. Apple specifically identifies demanding apps and display use among factors that can affect charging time.

Why a phone charges slowly covers these interacting limits. Comparing only the number printed on two chargers leaves out the phone and its operating conditions.

What should you compare on a wireless charger?

Match certification, supported receiver models and power capability, then account for the required adapter and case. Separate peak watts from stored battery energy, which the mAh and Wh guide explains.

Wireless charging works because a controlled changing magnetic field transfers energy across a small gap. Alignment improves that link; compatible electronics and temperature management determine how effectively the complete system charges the battery.

If you want to go further, How Does a Pregnancy Test Work? is a good next read.

For a closely related question, see How Does a Touchscreen Work?.

Frequently asked questions

Do magnets supply the energy for wireless charging?

No: alignment magnets help position the charger and device. The power supply drives an alternating current in the transmitter coil, creating the changing magnetic field used for energy transfer.

Does a 25W wireless charger always deliver 25W?

No: that is a supported peak capability under compatible conditions. The receiver, power adapter, alignment, battery state and temperature can reduce actual charging power.

Can a phone case stop wireless charging?

Yes: a thick, metal or otherwise incompatible case can interfere with positioning or energy transfer. Case compatibility should be established for the actual charger and device rather than inferred from appearance.

Are Qi2 and MagSafe interchangeable names?

No: Qi2 is a Wireless Power Consortium standard and certification ecosystem, while MagSafe is Apple's branded system. Their magnetic alignment concepts overlap, but product compatibility and supported power still need to match.

Does wireless charging damage every phone battery?

The charging method alone does not establish a battery's future condition. Temperature and the device's charging management matter, and makers can slow or pause charging when conditions require it.

Sources

  1. Wireless Power Consortium: How Qi works
  2. Wireless Power Consortium: Principle of inductive power
  3. Wireless Power Consortium: Qi wireless charging and certification
  4. Wireless Power Consortium: History of the Qi specifications
  5. Wireless Power Consortium: Qi2 25W launch announcement
  6. Apple: How to charge your iPhone wirelessly
  7. Apple: How to use your MagSafe Charger with iPhone
  8. Apple: About iPhone charge speeds
  9. Apple: Understand thermally limited charging on iPhone

More in Science